PowKiddy RGB10- RK3326 Retro Handheld Unboxing and Review.
A few months have passed since the release of RK2020. I admit it has brought us a new experience for emulating DC, PSP with a good running performance At the end of last month, a copied RK2020, RGB10 from PowKiddy was released I'll compare it with RK2020 in this video if you are interested don't miss it! The box is simple, printed with the brand name Let's take a look at what's in the box.
The RGB10 a micro SD card, a manual in three languages and 6 silicone caps for joystick I must say the color is odd and I thought it's strange why so many silicone caps there then I found the patterns are different The small bumps can achieve different feelings when you operating the joystick, which is quite novel and there's a Type-C charging cable inside The device is better than what I expected, you know.
It seems a bit cheap from the picture I browsed before, just like some plastic stuff When I get this unit, it's quite good. looks so small lighter than RK2020. let's go back to the rgb10 The bright yellow reminds me of Nintendo Switch Lite immediately The unit is very comfortable at the touch with ABS plastic shell I'd like to say the buttons are well placed.
You will not hear it rattles like RK2020 There’s a white rubber dot on every corner of the back I think they are used to avoid slippering Putting it to the desktop like this that's pretty good A B X Y buttons are the same as Revo K101 shown in our latest video it uses a round convex design.
The gap in the middle is smaller and tighter than that of the RK2020 so it won’t go left and right when pressed The plus and minus buttons are also copied Switch Lite. I thought they were for volume adjust, but they’re useless after testing. I will try them again later.
The D-pad is recessed, fits the position of my thumb It's easy to control and adjust the direction I mean you don't need to push it very hard. If the ABXY buttons are also designed like this it will be more comfortable. The joystick is exactly the same as RK2020 and it is a little higher Hope you can see it clearly you can feel the charming joystick all around.
But for me, a higher joystick, with a silicone cap installed means that my finger has to be raised to a higher position. It will be very tiring of keeping such a gesture Select and Start buttons are designed with a semicircle, as the PSP Go it has two pairs of shoulder buttons.
I don't think they are easy to press I prefer the raised L2/R2 buttons of the RK2020, which are convenient for faster locating. You can see the type-C charging port, TF card slot, a 32GB card inserted already also, they claim it supports a 128GB micro SD card a headphone jack there and we get an OTG and mono speaker at the bottom I found a problem there.
When I tested the device. on the back of the machine, there is a bulge Maybe the battery is not installed properly Because the RGB10 is similar to the RK2020 so I will not do more introduction When playing Mario Kart you can use the plus and minus button to speed up and release props In some games it can also be used to switch the angle of view The biggest improvement of RGB10 is that charging is much faster than RK2020 it can be turned off and charged when exiting the game My finger can cover the Select and Start button at the same time it's easier to operate than RK2020 The charging issue has been greatly improved.
